line centered in a point

Replies to This Discussion

Permalink Reply by Joseph Oster on August 27, 2015 at 8:45am

The 'X' vector can be replaced by 'Y', Z' or any arbitrary vector direction.

The "*" on the second 'Move' indicates an expression: "-x", which is the opposite direction.

Permalink Reply by mari on August 27, 2015 at 9:12am

Thank you so much!!

Permalink Reply by mari on August 27, 2015 at 9:14am

The problem is that i continue having two lines, not one line that goes both sides.

thank you marina.

Permalink Reply by Joseph Oster on August 27, 2015 at 9:49am

I don't know what you did but the code I posted has only one line.  This is about as basic as it gets...  GH code attached (with code added to rotate the vector - hope that doesn't create confusion).

Attachments:

• midline_20150827a.gh, 11 KB

Permalink Reply by mari on August 27, 2015 at 9:55am

the formula that i have is this, could you help me?

Thank you!!

Attachments:

• marina question.gh, 179 KB

Permalink Reply by Joseph Oster on August 27, 2015 at 10:09am

I've done the best I can to answer your question.  The code you just posted is far too extensive and complex for me to decipher.  Good luck.

Permalink Reply by Daniel González Abalde on August 27, 2015 at 10:28am

Esto debería valerte, es básicamente lo mismo, pero representado de otra forma.

Attachments:

• marinaquestiondga.gh, 168 KB

Permalink Reply by mari on August 27, 2015 at 10:40am

Thanks for your help friends!!