Kangaroo Mesh Machine uncomplete mesh

Hello,

Im using the MeshMachine component from Kangaroo along with Plankton to generate a mesh which includes some lines as well, but I am getting an incomplete mesh out of it.

Would greatly appreciate any suggestinos or input to solve this issue.

Thanks,

Attachments:

mesh_xxx.gh, 29 KB
mesh_xxx.bmp, 2.8 MB

Replies to This Discussion

Permalink Reply by ng5 Alex on June 4, 2014 at 7:41am

hello there.

first i added a timer to the MeshMashine (helps seeing the component working through time)

then a added the mesh outline as fixed and then the start and end points of the lines you have as fixed vertices (kind of the opposite of what you had), and it works (i think thats what you are after)

hope that helps

cheers

alex

Permalink Reply by dadandroid on June 4, 2014 at 8:03am

thnx, although In this case, you still can´t see the included lines in the mesh. I guess the only workaround it is spliting the initial brep with the lines, then joining it back, and using this surface with the lines in it to begin with.

Permalink Reply by ng5 Alex on June 4, 2014 at 8:11am

the included lines in the mesh are the radius like lines you have? if yes you want these to be mesh edges of the final remeshed mesh?

Permalink Reply by dadandroid on June 4, 2014 at 8:31am

exactly.

Permalink Reply by ng5 Alex on June 4, 2014 at 8:44am

then yes. i believe your description sound good.

RSS