IntCrv and Branching problem. -solved- ¡Now a loft problem! -solved-Thx to Dirk

Hi folks!

I'm having a two part problem anda can't manage the solution:

First with the IntCrv object. I add to it the point sets from each branch trying to get a closed IntCrv for each floor of the "tower", but the IntCrv (and the Polyline too) keep jumping from the last pint of each floor to the first of the next one and so on. If I use the Periodic parameter and set it to True, it just goes from the very first point to the last of all of them at the top, closing the whole spiral.

Help with closing at every 4th point?

The next question is that I'm wondering if it is possible to autobranch the curves, meaning that I have manually created the 4 branches, but if I use 5 or 6 manually created lines I would have to create the same amount of branch objects, wouldn't I?

Thx in advance!

Attachments:

TORRE 001.ghx, 152 KB
TORRE 001.3dm, 68 KB
torre01.jpg, 222 KB

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Dirk Anderson on July 20, 2009 at 5:33am

try this to transpose your list of points, the list count component will also update the profile count if you add or remove curves.

Permalink Reply by Miguel Villegas on July 20, 2009 at 10:59am

Thanx a lot Dirk. That really helped a lot! I was trying to do it by using the new tree option, and didn't think of flattening and sorting.

Now I have a loft problem with the cross-sections I managed to get, they don't loft in a proper envelope, I had to fake it by lofting the along sections from wich they came.

Anybody knows why they don't loft?

Attachments: