honneybee simulation error

i just do a very easy case , but it happened error , i don't know why .

if anyone can tell me why thank you very much.

Current document units is in Meters
Conversion to Meters will be applied = 1.000
[1 of 8] Writing simulation parameters...
[2 of 8] No context surfaces...
[3 of 8] Writing geometry...
[4 of 8] Writing Electric Load Center - Generator specifications ...
[5 of 8] Writing materials and constructions...
[6 of 8] Writing schedules...
[7 of 8] Writing loads and ideal air system...
[8 of 8] Writing outputs...
...
... idf file is successfully written to : c:\ladybug\unnamed\EnergyPlus\unnamed.idf

Analysis is running!...
c:\ladybug\unnamed\EnergyPlus\eplusout.csv
...
...

Done! Read below for errors and warnings:


Program Version,EnergyPlus, Version 8.4.0-09f5359d8a, YMD=2016.05.27 21:14,IDD_Version 8.4.0

   ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.

   ************* Beginning Zone Sizing Calculations

   ** Warning ** ManageSizing: For a plant sizing run, there must be at least 1 Sizing:Plant object input. SimulationControl Plant Sizing option ignored.

   ************* Testing Individual Branch Integrity

   ************* All Branches passed integrity testing

   ************* Testing Individual Supply Air Path Integrity

   ************* All Supply Air Paths passed integrity testing

   ************* Testing Individual Return Air Path Integrity

   ************* All Return Air Paths passed integrity testing

   ************* No node connection errors were found.

   ************* Beginning Simulation

   ************* Simulation Error Summary *************

   ** Warning ** The following Report Variables were requested but not generated

   **   ~~~   ** because IDF did not contain these elements or misspelled variable name -- check .rdd file

   ************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL COOLING ENERGY, Frequency=Hourly

   ************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL HEATING ENERGY, Frequency=Hourly

   ************* Key=*, VarName=CHILLER ELECTRIC ENERGY, Frequency=Hourly

   ************* Key=*, VarName=BOILER HEATING ENERGY, Frequency=Hourly

   ************* Key=*, VarName=FAN ELECTRIC ENERGY, Frequency=Hourly

   ************* Key=*, VarName=ZONE VENTILATION FAN ELECTRIC ENERGY, Frequency=Hourly

   ************* Key=*, VarName=EARTH TUBE FAN ELECTRIC ENERGY, Frequency=Hourly

   ************* Key=*, VarName=PUMP ELECTRIC ENERGY, Frequency=Hourly

   ************* Key=*, VarName=ZONE VENTILATION TOTAL HEAT LOSS ENERGY, Frequency=Hourly

   ************* Key=*, VarName=ZONE VENTILATION TOTAL HEAT GAIN ENERGY, Frequency=Hourly

   ************* There are 1 unused schedules in input.

   ************* There are 1 unused week schedules in input.

   ************* There are 3 unused day schedules in input.

   ************* Use Output:Diagnostics,DisplayUnusedSchedules; to see them.

   ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.

   ************* EnergyPlus Sizing Error Summary. During Sizing: 1 Warning; 0 Severe Errors.

   ************* EnergyPlus Completed Successfully-- 3 Warning; 0 Severe Errors; Elapsed Time=00hr 00min  1.19sec