HoneyBee Add glazing Ratio and occupancy period components

Hello Guys,

I'm testing a sort of benchmark room to which I will compare the actual project that I'm wotking on.

I'm doing a DLA analysis. And I want to understand why the add glazing based on ratio component gives me 2 separated windows (refer to image), I really need to work with one window pane.

Also I will like to change the occupancy file from 9-5 to 8-6. How can this be done

Thank you all

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Abraham Yezioro on June 9, 2014 at 12:01pm

Hi Claudio,

For the window size i suggest to constrain the sill height and window height inputs. Giving a low window height will do the trick (i believe). If the ratio will be higher that the constrain then the window will be resized in one piece.

As for the schedules ... i will also be glad to hear.

-A.

Permalink Reply by Claudio on June 9, 2014 at 12:30pm

Its not exactly what I need. I need to do the test with a window sill at 0.5m and a height of 1.5m in order to have a bench mark similar to the ongoing project.

Thanks for your answer

Permalink Reply by Mostapha Sadeghipour Roudsari on June 9, 2014 at 5:52pm

Hi Claudio,

1. The newest version of addGlazing (which you can download from github or find in the attached file) has a toggle for keeping the window as a single window. If this is still not what you are looking for then you can create the glazing as a separate geometry.

2. You can just use the schedule component to create the new schedule.

Mostapha

Attachments:

addGlazing_and_Schedule.gh, 32 KB

Permalink Reply by Claudio on June 9, 2014 at 6:20pm

Mustapha,

That's exactly what I'm looking for. again you have saved my day

Thank you very much

Claudio

Permalink Reply by Claudio on June 11, 2014 at 6:20am

Hello Mostapha. I've install the component from github. Just copied in to the ghuser folder. And it seams to work but the components its now in its own section called 00- instead of in section 0| Honeybee.

Its this a normal behavior ?

Thank you

Permalink Reply by Mostapha Sadeghipour Roudsari on June 14, 2014 at 5:52pm

Yes. This is how it should be in the most updated version.

Permalink Reply by Michal Dengusiak on June 16, 2014 at 2:10am

Hi,

I was wandering if you could help me,

I am having error in glazingCreator step:

Attachments:

ComponentsForTest-v1.gh, 161 KB

Permalink Reply by Abraham Yezioro on June 16, 2014 at 3:30am

Hi Michal,

You need to update the component.

-A.

Permalink Reply by Michal Dengusiak on June 16, 2014 at 3:38am

Hi,

I updated files... does it work for you?

Permalink Reply by Abraham Yezioro on June 16, 2014 at 4:18am

Yes,

This specific component has to be inserted from the toolbar since the number of inputs changed recently (in this same thread). The update component is not enough in those cases.

Attached a working version ...

-A.

Attachments: