Grasshopper

algorithmic modeling for Rhino

Grasshopper and coffee Challenge

The darling of the Grasshopper community mentioned a GH & Coffee challenge so I have decided to do exactly that:

Original post if you're interested: http://www.grasshopper3d.com/forum/topics/interconnecting-lines-win...

Here's the challenge:

I've based it on my recent attempts to learn GH by repeating problems posted on the forum. I find most of the solutions aren't really parametric and only work under one set of conditions which really defeats the purpose and this forms part of the challenge. Solve this post:

http://www.grasshopper3d.com/forum/topics/move-an-object-until-a-co...

Summary of problem:

1. A set of lines with a constrained length in static positions around a variable radii circular base

2. The top circle constrains the end point of the lines and can rotate and also change its radii, thus 'pulling' the line end points in its direction(s)

3. The top will therefore 'sink' as the rotation occurs or either radii change due to the mechanics of the constraints

 

 

Rules:

1. Must work parametrically, i.e. not break when inputs change

2. 1 Hour to solve it

3. Use as few components as possible (clustering is cheating!)

4. Scripting not allowed

5. Must solve as efficiently as possible

Views: 750

Attachments:

Replies to This Discussion

Permalink Reply by AnewGHy on June 10, 2013 at 6:16am

Attached is my solution.

Criteria assessment:

1. Check

2. 46 min

3. Check

4. Check

5. Check (compared to the other offering in the original post of this problem, which incidentally doesnt really work!)

 

While not perfect, it most certainly works! Contenders, please enter the ring...

Permalink Reply by AnewGHy on June 10, 2013 at 6:20am

File if you missed it.

Attachments:
Permalink Reply by Chris Tietjen on June 10, 2013 at 6:23am

Wasn't it you who missed it? :)  

Have patience.

Permalink Reply by Danny Boyes on June 10, 2013 at 6:22am

I've never been called the darling of the GH community before. Thanks!

Permalink Reply by AnewGHy on June 10, 2013 at 6:25am

I think it was about time....

Permalink Reply by Danny Boyes on June 10, 2013 at 6:35am

I'm going to go and have a sandwich now in accordance with professor internet's level 1 rule in life. :)

Permalink Reply by AnewGHy on June 10, 2013 at 6:47am

I think you deserve a celebratory sarnie, but dont forget about the challenge...

Permalink Reply by Reino on June 10, 2013 at 8:39am

5 min. with simple grasshopper components

Attachments:
Permalink Reply by AnewGHy on June 10, 2013 at 8:49am

Wonderful:

Criteria assessment:

1. Check

2. 5 min

3. Check

4. Check

5. Fail (spheres slows the solver down as the count increases)

Permalink Reply by David Stasiuk on June 10, 2013 at 9:20am

15 min...

Attachments:
Permalink Reply by AnewGHy on June 10, 2013 at 9:29am

Beautiful:

Criteria assessment:

1. Check

2. 15 min

3. Check

4. Check

5. Check

Permalink Reply by Frane Zilic on June 15, 2013 at 12:11pm

Here's another approach defining initial height of the structure instead of bar length

15 min to solve + 10 to clean up the solution

Attachments:

RSS

About

Scott Davidson created this Ning Network.

Translate

Search

Photos

  • Add Photos
  • View All

Videos

  • Add Videos
  • View All

© 2024   Created by Scott Davidson.   Powered by

Badges  |  Report an Issue  |  Terms of Service