Gill like surface..

Replies to This Discussion

Permalink Reply by Avishek Das on June 19, 2011 at 11:50pm

also i want to any method to achieve this...http://www.alexhogrefe.com/display/ShowImage?imageUrl=/storage/site...

Permalink Reply by Danny Boyes on June 20, 2011 at 2:44am

You will need to make use of the Shift list component in order to get lofting pairs of curves,

an un-modified section curve and the next modified section curve.

Have a look at this for an example.

Attachments:

• gills.ghx, 171 KB
• gills.3dm, 59 KB

Permalink Reply by Avishek Das on June 20, 2011 at 7:31am

Thank u danny..thanks a lot

Permalink Reply by Roig on November 11, 2011 at 2:38pm

Hi danny,

 

one question: why do you use the -1 shifted list? it works fine connecting the geom. element directly.

Are you doing it to remove some spare curve or something like that?

Thanks. Roig

Roig

Permalink Reply by Michael Pryor on November 11, 2011 at 3:10pm

I use curves attached perpendicular to guide curves and rotate them accordingly around the guide curve, then loft all the rotated curves. Gives some interesting results. http://www.grasshopper3d.com/photo/pringle-gills?context=user

Permalink Reply by Roig on November 11, 2011 at 3:21pm

yeah¡ look awesome¡¡

did you use some atractors?

Permalink Reply by Michael Pryor on November 11, 2011 at 3:50pm

yea, accompanied by sin waves

Permalink Reply by Nicky on April 2, 2012 at 4:21am

how to create a surface with 5V control pointsthank you