Extrude a sharp curved plate

Replies to This Discussion

Permalink Reply by Danny Boyes on August 10, 2011 at 8:33am

From your screen shot it doesn't look as if you are actually running version 0.8.0050.

You'll need 0.8.0050 to open the file. It won't work on previous versions.

So to make it work use a Graft Component (Sets Tab > Tree Panel) between each Wires Component and the Loft Component.

 

Permalink Reply by Test123 on August 10, 2011 at 8:44am

okay now it works. i have the newest update take a look at the screenshot.

maybe i can explode my multiple surface and take all edges and use then your program.  I let you know if I get it going.

 

thanks for your help so far

 

Permalink Reply by Danny Boyes on August 10, 2011 at 8:54am

this is what I was thinking of.

Permalink Reply by Test123 on August 11, 2011 at 7:52am

hey guys

 

its working now. the program shows some errors but it works without any problem :) i hope the pictures shows you what i tried to reach

 

thx for your help guys

 

 

 

Permalink Reply by Moonbeast on August 11, 2011 at 10:15am

Either use Davidson extrude wall command in 8.005 or you can offset surf , beep wire frame, join crv, straight loft, join brep

• ‹ Previous
• 1
• 2
• Next ›
• Page