Error in Revit

Hi All,

I have a problem with import of ifc file in Revit (created in grasshopper). See screenshot included. Does anyone know how I can solve this problem?

Thanks,

Halim

Attachments:

Knipsel.PNG, 14 KB
Knipsel1.PNG, 139 KB

Replies to This Discussion

Permalink Reply by AMALIA VRANA on August 22, 2016 at 8:32am

I am not sure but check your units in GH and Revit (are they both in meters or mm?) and then check if you have a single layer floor family created in Revit. If you don't, you have to create it (I had to name this family "Generic Floor Type" in order to make it work, regardless of the name I was giving in GH).

Permalink Reply by Jon Mirtschin on August 22, 2016 at 4:39pm

Amalia has made some good suggestions. Check Rhino document units are metres (else you have thin layer 0.7mm which is too thin for Revit limitations in this area).

If you have problems still, please attach (or send to me) the IFC file and I will advise.

Cheers,

Jon

Permalink Reply by Halim Yilmaz on August 23, 2016 at 5:14am

Amalia thanks for your reply.

Jon I attached two examples (one of youtube tutorials, one of myself). I choosed the same steps as in the tutorial. If I import the tutorial ifc in Revit everything is ok. But if I import the ifc of my own example I got an error message or the 3D model is not the same.

Can you help me further please?

Best,

Halim

Attachments: