cube piping a Truss

Replies to This Discussion

Permalink Reply by Gijs de Zwart on November 27, 2013 at 2:07pm

Hi

see if the attached will do. It makes use of Weaverbird, so hopefully you've installed that. Otherwise it might still be possible, but this the easiest way I think

Attachments:

• rectangular-pipes.gh, 10 KB

Permalink Reply by Lee Souder on November 27, 2013 at 5:13pm

Yes that worked, almost. I installed WB and replaced your curves with mine. Something might be wrong with my portion of code. ..or maybe I cut your code wrong. The original Truss GHX came from someone else by the way. I am learning by dissecting GHX's.

The GHX is attached. Thank you so much Gijs!

Attachments:

• Example-Truss-LSouder.ghx, 616 KB

Permalink Reply by Gijs de Zwart on November 28, 2013 at 1:53am

if you right click on the line component that connects to my definition, and select flatten, you get a perfect result.

Permalink Reply by Lee Souder on November 28, 2013 at 12:59pm

ah-ha! thank you again!!

Permalink Reply by Gui Talarico on November 27, 2013 at 3:51pm

You can also take a look at Exoskeleton, by David Stasiuk and Daniel Piker

 http://www.grasshopper3d.com/profiles/blogs/introducing-exoskeleton...

Permalink Reply by Lee Souder on November 27, 2013 at 5:52pm

Wow.

Thank you Gui