Copy and Align Group to GH Line?

Replies to This Discussion

Permalink Reply by Sameer Kumar on October 14, 2009 at 4:33pm

It can be achieved with a combination of "horizontal frames" and Orient component quite easily.

Hope this helps.

Permalink Reply by Greg S on October 14, 2009 at 4:39pm

Thanks, I learned it while you suggested it. It seems to work,but only for one. See my post.

Permalink Reply by Greg S on October 14, 2009 at 4:38pm

The orient tools seems to work, but only for one of the planes, the rest of the GH Lines just get one line from the Plane Group. Rhino File and Def attached.

Attachments:

• AlignandReplicate Group2.png, 90 KB
• Gating Definition2.png, 17 KB
• Gating_App.zip, 2.7 MB

Permalink Reply by Sameer Kumar on October 14, 2009 at 4:50pm

Either graft the frames as I have done or set the Orient component to cross reference.

Permalink Reply by Greg S on October 14, 2009 at 6:26pm

Your method is about 9 times easier. Thanks