Conversion from Guid to Geometry

Replies to This Discussion

Permalink Reply by David Rutten on June 10, 2011 at 12:44pm

What are the errors you see exactly?

 

Alternatively, you could try using the Grasshopper data casting logic, see if it works outside of the Curve parameter. Have a look at the following methods, they might be useful:

 

1. Grasshopper.Kernel.GH_Convert.GetCurveFromDocument()
2. Grasshopper.Kernel.GH_Convert.ToGeometricGoo()
3. Grasshopper.Kernel.GH_Convert.ObjRefToGeometry()
4. Grasshopper.Kernel.GH_Convert.ToCurve()
5. Grasshopper.Kernel.GH_Convert.ToGHCurve()

 

The Curve parameter calls ToGHCurve(), which in turn will create a Referenced curve if it's determined that the input data is a Guid. If this curve subsequently fails to load 'itself' from the document a conversion error will be thrown.

 

--

David Rutten

david@mcneel.com

Poprad, Slovakia

Permalink Reply by David Rutten on June 10, 2011 at 12:48pm

To elaborate, the GH_Convert class is rather extensive and handles a cr*pload of conversions. It's also highly optimized using a minimum of reflection and lots of type jump tables to quickly reverse engineer data into it's proper form. If there is a bug in this class it needs to be found as it is used everywhere.

 

--

David Rutten

david@mcneel.com

Poprad, Slovakia

 

Permalink Reply by Benjamin Golder on June 10, 2011 at 1:16pm

The error I'm getting is:

"Data conversion failed from Guid to Curve" (that's what all the red parameters say)

though it might be Surface or whatever. There seems to be no clear pattern as to when it the error is thrown. I'll mess with it some more and get back to you.

 

Also, yes it does handle a mega-cr*pload of conversions! It's one of the coolest aspects of Grasshopper's functionality in my opinion. I've used parameters to recast all sorts of things. one of my favorite uses of this is to convert geometry into strings and then use string comparisons to filter geometry types.

Permalink Reply by Benjamin Golder on June 10, 2011 at 1:32pm

I made a mistake in my original post:

 

It always converts successfully but sometimes shows an error when it does so. So it works fine, but is a little confusing (showing an error despite working fine).

The parameter that failed to convert was trying to turn points into a curve (stupid me).

 

Using a "Geometry" parameter, however, always seems to work with no errors.

 

Permalink Reply by Benjamin Golder on June 10, 2011 at 1:34pm

If it's at all helpful: every curve I'm trying to reference is either a Polyline Curve or a Line-like Curve. Also, some are huge and very far from the origin.

Permalink Reply by Giulio Piacentino on June 10, 2011 at 1:49pm

Hi Benjamin,

could you please post a definition to test?

(right now I think that maybe some geometry is invalid and therefore is not added to the document?)

 

> Can I instantiate gh classes with IronPython?

Yes, we should be able to. An example is here.

- Giulio

________________

giulio@mcneel.com
McNeel Europe

 

- B

- Giulenjamin

Permalink Reply by Benjamin Golder on June 10, 2011 at 2:01pm

attached.

 

> Can I instantiate gh classes with IronPython?

Yes, we should be able to. An example is here.

That is sooo cool!!!!!!

Attachments:

• conversion_sample.ghx, 169 KB
• sample.zip, 1 MB

Permalink Reply by David Rutten on June 11, 2011 at 2:47am

Trying to open this but I cannot load the Python component at present (sandboxing exception)...

 

--

David Rutten

david@mcneel.com

Poprad, Slovakia

Permalink Reply by Giulio Piacentino on June 11, 2011 at 3:27am

Hi David,

considered the authorship of the reflection-load API, you probably know this... :)

There should be as usual these two options: either turn on "memory load" (COFF) or right click the component file (.gha) and choose "Unblock".

- Giulio
________________

giulio@mcneel.com
McNeel Europe

Permalink Reply by Benjamin Golder on June 13, 2011 at 1:41pm

Is that something I can help with? Did I upload something wrong or leave strange components in the definition? Let me know if I should do something different.

 

Thank you!

Permalink Reply by Benjamin Golder on June 10, 2011 at 3:10pm

I tested the returned RhinoObjects for Visible, Mode, and IsValid and everything looked fine.