Connected Point

Hi Friend,

i have 1 question

how to connect point 0 From group 1 to point 0 From Group 2 to point 0 From Group 3 and more ...

but with out list item. because dosent parametric

if more group, list item Too added

pic attached

Thanks

Attachments:

Capture.JPG, 186 KB

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Joe Allberry on September 18, 2015 at 4:44am

"Flip Matrix" component (or "Path Mapper": {A;B} -> {B;A}) then connect to "Polyline" or "Interpolate" for a curve.

Permalink Reply by pirooz on September 18, 2015 at 4:56am

hi joe,

thanks for reply

but I do not know how to working path mapper

this Code : {A;B} -> {B;A} 4 point in one group hes does polyline.

Permalink Reply by Joe Allberry on September 18, 2015 at 5:11am

Just using the Flip Matrix component should work.

If you internalise the relevant data and upload the GH definition I can have a proper look at it using path mapper for you?

Permalink Reply by pirooz on September 18, 2015 at 5:29am

thanks joe,

how to work flip matrix ?

thanks a lot

Permalink Reply by Joe Allberry on September 18, 2015 at 5:47am

Permalink Reply by pirooz on September 18, 2015 at 7:52am

Hi Dear Friend.

excuse me for many question

i tried flip matrix. but dosent work. i'm confused !!!

Thanks a lot

Attachments:

Capture2.JPG, 139 KB

Permalink Reply by Joe Allberry on September 18, 2015 at 7:58am

It's hard to see from images what is going on, but I suspect you have more than one level of branch in your points list? Flattening the list will create one long list, so when flipped will just be individual points - this is why the IntCrv won't work.

As I said, attach your definition with geometry internalised (right click the points container and "Internalise Data") and I can have a better look.

Permalink Reply by pirooz on September 18, 2015 at 8:08am

HI JOE

here this file

many many thanks

Permalink Reply by pirooz on September 18, 2015 at 8:08am

HI JOE

here this file

many many thanks

Attachments:

SITE BR.gh, 7 KB

Permalink Reply by Joe Allberry on September 18, 2015 at 8:55am

No worries! There's a couple of options in the attached. It's really worth having a look at data structures and getting your head around the path mapper, opens the door to a lot of the functionality of GH. Have a good weekend!

Attachments: