Closed surface from points

Replies to This Discussion

Permalink Reply by Julian Buhagiar on June 18, 2015 at 2:34pm

you could try patching with blend curve or loft, but some definition is lost.

Attachments:

• surface_from_points(1).gh, 28 KB

Permalink Reply by Elisei Kulikovsky on June 18, 2015 at 4:46pm

Thank you, Julian.

I already achieved similar result with the curves (you can see it in my definition, Network Surface).

But the model built with SrfGrid has slightly different geometry and I like that "slightly" more.

It would be perfect if SrfGrid has something like "Closed" or "Periodic" option. I searched on the forum and found the answer by David Rutten, in which he said that it is a very complicated task.

I found no other solution with SrfGrid except copying the surface into 2 separate surfaces and shifting the seam.

Anyway, thanx for your help.

Permalink Reply by Eimile on December 28, 2015 at 6:23am

Hey,

I have a similar problem, but can't figure out the solution to it. Can you share the idea how you fixed it?

Permalink Reply by Elisei Kulikovsky on December 29, 2015 at 1:44am

Hey, Eimile,

here's the file, but the result achieved using SrfGrid is pretty rough.

And Happy New Year! )

Attachments:

• surface_from_points_merged.gh, 31 KB

Permalink Reply by Eimile on December 29, 2015 at 3:23am

Thanks, and happy New Year as well. :)