Baking Problems

Replies to This Discussion

Permalink Reply by David Rutten on January 5, 2010 at 3:39am

Which surface?

--
David Rutten
david@mcneel.com
Poprad, Slovakia

Permalink Reply by Miklós Hatvani Deák on January 5, 2010 at 2:22pm

So i made a surface with some kind of holes on it with possibilties of size change. Actually it is a planar panelled surface. When i bake it then i can not look through the holes becouse there is a unknown surface in the hole. (before the baking there is no sign of it)

Permalink Reply by David Rutten on January 5, 2010 at 2:28pm

Can you post this surface? Is it possible that the shading mesh is wrong and that it has erroneously covered the holes?

--
David Rutten
david@mcneel.com
Poprad, Slovakia

Permalink Reply by Miklós Hatvani Deák on January 5, 2010 at 3:19pm

So here is the pic.

Attachments:

• Pp.jpg, 308 KB

Permalink Reply by David Rutten on January 5, 2010 at 3:52pm

Yes, that is indeed a picture of the surface. But without the actual 3D surface I cannot determine whether this problem is due to a bug in the Rhino mesher, whether the surface topology is messed up or whether there is a problem with the Grasshopper -> Rhino baking routine.

By the looks of it, it appears to be a mesher bug, because some of the panels are displayed correctly. Try changing the meshing parameters in Rhino->Tools->Options->Document Properties->Mesh and see if it fixes the gaps.

--
David Rutten
david@mcneel.com
Poprad, Slovakia

Permalink Reply by Miklós Hatvani Deák on January 5, 2010 at 4:44pm

Thank you really much ! I will try these things what you have mentioned. You are a really great help.

Permalink Reply by Miklós Hatvani Deák on January 5, 2010 at 4:47pm

This mesh option in rhino worked !!!!! Thanks again.