Attract points with point in a gradient configuration

Replies to This Discussion

Permalink Reply by Hyungsoo Kim on August 17, 2017 at 4:01am

Hi.

This might help you.

Attachments:

• 170817Attractpointswithpoints_re.gh, 8 KB

Permalink Reply by Cosimo Scotucci on August 17, 2017 at 5:27am

Thank you! it was helpful!!

Attached you can find the result!

Tnx 

C.

Attachments:

• 170817 Attract points with points02.gh, 11 KB

Permalink Reply by Joseph Oster on August 17, 2017 at 6:29am

You didn't internalize your 'Geo' parameter so your GH models show nothing.

Nice work Hyungsoo Kim.

Permalink Reply by Cosimo Scotucci on August 17, 2017 at 6:39am

Hi Joseph

basically I did it to be related to other geometry that I already had on Rhino. 

Permalink Reply by Joseph Oster on August 17, 2017 at 6:58am

What's the point of posting GH code without the associated geometry?  Either include a Rhino file or right-click the 'Geo' param and choose "Internalize".  In this case, any flat surface would do but that isn't always the case.  See item #3: Attach minimal versions of all the relevant files.

By the way, notice that Hyungsoo Kim did not use 'Pull' as it isn't necessary.