algorithm

Hi guys,

I have trying to create a ceiling and wall like the attached image and I have written a simple script but not the answer though. I have also attached the model( the curve over ceiling and wall ) looking to have the plywood structure.

Thank you

Attachments:

drawing 2.3dm, 195 KB
grass.gh, 6 KB
0b5778e0d063daea3273e957ef50c275.jpg, 63 KB

Replies to This Discussion

Permalink Reply by Laurent DELRIEU on November 19, 2016 at 2:27pm

Why grasshopper ? There are not much parametric, except the placement of point of departure of plywood. After that some split, trim, cut in Rhino will do the job. So have you an idea how to put the placement in x, z ? Special placement with shifts ? Some scale of plywood depending on the height ... ?

Permalink Reply by faya on November 20, 2016 at 1:30am

you mean to use commands like flow along form, or maybe paneling tools?

thank you

Permalink Reply by Laurent DELRIEU on November 20, 2016 at 1:51am

It could be rectangular array of plywood boards.
Depending on these questions it could be useful or net to use GH
are the plywood boards aligned on a grid ? Other placement ? All parallels?
Thickness widths constant or not?
I understand that the length must be adjusted so they are contained between red surfaces and the wall.
Can you do a sketch with what you want, variables you want to explore ...?

Permalink Reply by faya on November 20, 2016 at 3:59am

the plywood are all parallel and same thickness.

(I understand that the length must be adjusted so they are contained between red surfaces and the wall) yes exactly right.

see the model and sketch, indeed close to the ceiling woods follow the curve line but in the lower part they are randomly larger and smaller I want to have them as display surface for cell phone

thank you

Attachments: