A wall with different type of glasses

Hi guys, I have the same problem like masoome in the below, even with the lastest version.

but beside there is another error as it showed here, that i dont know how to solve it.

thanks in advance.

Attachments:

Untitled.jpg, 102 KB

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Abraham Yezioro on November 8, 2015 at 8:31am

Hi Masoumehta,

I also reported today the same error Massome and you mentioned.

For the other error you need to reinsert the component in the scene.

-A.

Permalink Reply by masoumehta on November 8, 2015 at 8:37am

hi abraham,

thanks for your consideration. i'll try it.

-msoumeh.

Permalink Reply by Mostapha Sadeghipour Roudsari on November 8, 2015 at 12:15pm

Abraham is right. Your error is different. I'm looking into the issue.

Permalink Reply by masoumehta on November 8, 2015 at 1:26pm

hi mostafa

I did what Abraham said and I got the result but it still have this error. I don't know if it had changed my result or not.

thank you

Attachments:

Untitled.jpg, 135 KB

Permalink Reply by Mostapha Sadeghipour Roudsari on November 8, 2015 at 2:04pm

This should be fixed now. Update your file and try again:

Permalink Reply by masoumehta on November 9, 2015 at 12:08am

hi mostafa
thanks for your consideration, this is fixed now, but a new error occurs in another component that I didn't face it before.
thank you for your help.

Attachments:

Untitled.jpg, 123 KB

Permalink Reply by Mostapha Sadeghipour Roudsari on November 9, 2015 at 12:10am

Seems to be an issue with the recipe. I need your file to be able to help more.

Permalink Reply by masoumehta on November 9, 2015 at 12:27am

I will send it for you
thank you

Permalink Reply by masoumehta on November 9, 2015 at 5:46am

mostafa, I upload 2 files here,the file named "HB final" is accomplished with the latest version and the last changes that I did. and this is the main file that we discussed about it before. the file named "HB01" was for the version that "child surfaces name" didn't add to the component. I just sent "HB01" for you to see the process, and I don't work on it now. thank you in advance

Attachments:

HB final.gh, 661 KB
HB01.gh, 668 KB

Permalink Reply by Mostapha Sadeghipour Roudsari on November 9, 2015 at 10:25pm

The error is because you have a glazing surface which has an empty space inside. Such an opening is not allowed in EnergyPlus.

I'm not sure what you're trying to do but if you're trying just to create a daylighting model then I would model a geometry like this surface by surface and add the right material to each surface. You don't need to create child surfaces. In case you want to use the model for Energy modeling then you should consider limitations of energy modeling. You can break down this surface into two U-shaped surface for instance.

Mostapha

Permalink Reply by masoumehta on November 10, 2015 at 6:28am

thank you mostafa,

I just need a daylighting model. I'll try new method you said.

RSS