Very easy question for you (close a sort of perimeter)

Hi guys

I have a sort of "perimeter" (this perimeter could be different, with more openings instead of 3 of the image). I would close these "openings", but without the Extend command (these openings could have different length). Is there someone that could help me?

Attachments:

Screen.png, 30 KB

Replies to This Discussion

Permalink Reply by Danny Boyes on October 11, 2012 at 11:23am

your lines are drawn the otherway around try putting a flip curve component into and see if you get better results

Permalink Reply by Landscape on October 11, 2012 at 12:39pm

Nothing ... problem persists :-(

Permalink Reply by Landscape on October 11, 2012 at 12:54pm

But ... in the attachment 2 points flow on a line, if one of this point flow on the first segment and the second point flow one the consecutive line maybe works!! On each line there will be one start point and one end point ... Hope that someone could help me!! :-(

Attachments:

Screen.png, 54 KB

Permalink Reply by Landscape on October 11, 2012 at 1:30pm

Another attachments

Attachments:

Screen.png, 20 KB

Permalink Reply by Raul Matagringo on October 12, 2012 at 2:45am

'Morning!

Just a messy and criminal solution

Select lines / Join the lines to polylines / Extend at Start & End / Join again.

My figure:

Result:

Permalink Reply by Landscape on October 12, 2012 at 2:56am

WOW ... it works. But now I've a unique perimeter. Is there a method to have the original perimeter and only the relative openings line??

Permalink Reply by Landscape on October 12, 2012 at 3:05am

I put "Trim with region" and seems to work ...

But ... I hope that works with anything ... eheheh!! :-)

Permalink Reply by Landscape on October 12, 2012 at 3:15am

Nothing ... it doesn't work ... My approach isn't right ...

Permalink Reply by Raul Matagringo on October 12, 2012 at 4:25am

is this what you want?

Permalink Reply by Landscape on October 12, 2012 at 4:41am

Sorry, I don't want the length of perimeter ... I would like to have the original shape (wall) and the opening's shape (window) separately. In this case I can select the walls or the openings ;-)

Permalink Reply by Raul Matagringo on October 12, 2012 at 7:27am

next one

what i want is to generate pipes in 2 steps.