Problem with the annual DGP Daysim simulation

Replies to This Discussion

Permalink Reply by Abraham Yezioro on March 26, 2015 at 9:13am

Alejandro,

Try to define the required TestPoints in the HB_annualDaylightSimulation component.

I think a warning should be added there, since it is a compulsory input and in your case it is missing.

Didn't tried myself but it can be the cause.

-A.

Permalink Reply by Abraham Yezioro on March 26, 2015 at 9:21am

Is not this.

Unplug the panel with the Perspective from the DS parameters. Then it will run. Don't know about the results, but it will run.

-A.

Permalink Reply by Alejandro Pacheco Diéguez on March 26, 2015 at 11:13am

Thanks Abraham, but then it does not produce any results.

Permalink Reply by Mostapha Sadeghipour Roudsari on March 26, 2015 at 12:29pm

I thought I get this fixed this once (http://www.radiance-online.org/pipermail/radiance-daysim/2014-Octob...). The issue was what Abraham mentioned. I will take another look soon. Thanks for reporting.

Permalink Reply by Alejandro Pacheco Diéguez on March 27, 2015 at 1:41am

Thanks Mostapha, I checked and the problem was that plus the fact that I was using several CPUs. I changed the CPUs from 8 to 1 and now it works. 

Permalink Reply by Mostapha Sadeghipour Roudsari on April 4, 2015 at 8:28pm

Good to know but does the results make sense? There is close to no documentation about this topic and I never get a clear response from the email list so I suggest you to do some comparative studies for couple of hours between glare component and the annual one.

Mostapha

Permalink Reply by Carmen Lai on April 30, 2015 at 1:46am

Hi Alejandro,

Following the aforementioned step, the model can run but not generate the results. How do you fix it?

 

Thanks,

Carmen

Attachments:

• TrialDGP.gh, 569 KB

Permalink Reply by amedeo scofone on November 24, 2015 at 3:11am

Hello Everybody I have the same problem, I followed What the comments below where saying but it does not a generate a result file!

Any suggestion?

Thanks

Attachments:

• AnnualDGP2.gh, 538 KB

Permalink Reply by Mostapha Sadeghipour Roudsari on November 30, 2015 at 8:22pm

Hi Amedeo, Your file is missing the input geometries so I can't re-create the error. What is exactly going wrong in your example?