how connect component output with output ?

Replies to This Discussion

Permalink Reply by David Rutten on June 6, 2015 at 6:17am

No.

What do you imagine this would do?

Permalink Reply by nikos tzar on June 6, 2015 at 6:18am

Hello mitchi,

You can't and actually it makes no sense  to try such a connection. What exactly are you trying to do?

For example, in the image you posted you wish to connect a surface with a vector... Say it was possible like this, what result would you expect from it?

Permalink Reply by nikos tzar on June 6, 2015 at 6:22am

Ok, just saw where you got this image from, There is no such connection in the image, its just 2 wires crossing:

Permalink Reply by michi cent on June 6, 2015 at 7:41am

i see it only look like output conection :-)

but still not work. here is my actuall definition

there is no data in the bounding box output.

Attachments:

• triangle surface.3dm, 72 KB
• triangle surface.gh, 6 KB

Permalink Reply by nikos tzar on June 6, 2015 at 7:53am

Hi Michi,

This is an old definition and many components have changed since then.

I believe you should remove the Toggle from the bounding box and also right-click on bounding box and select "Union Box". This should fix it for now :)

Attachments:

• trianglesurface-nt.gh, 15 KB

Permalink Reply by michi cent on June 6, 2015 at 8:23am

could you upload the file again it not work there is no definition inside

Permalink Reply by nikos tzar on June 6, 2015 at 9:03am

try this one.

You can still do these changes on your definition though, just lower the 2 sliders that are set to 21 so that it wont take forever to calculate.

Attachments:

• trianglesurfacent-reupload.gh, 13 KB

Permalink Reply by michi cent on June 6, 2015 at 10:07am

sorry but your gh definition is only a text...

and when i just lower the 2 sliders set to 1 it crashes also :-(

Permalink Reply by nikos tzar on June 6, 2015 at 10:58am

Only a text?

can't you open it from inside grasshopper?

drag&drop it inside the grasshopper window?

can you get a screenshot of what you mean by "text" please?

Permalink Reply by michi cent on June 6, 2015 at 11:44am

ok, can open it and it works, great. thank you :-)

in the next step i need this mesh on a closed surface.

this picture show the task.

i set the surface and put it in the surface morph, i hope it work but it not so easy i guess.

the surface is in the previous rhino file that i uploaded allready