HB simulation 'Failed to read the results'

Replies to This Discussion

Permalink Reply by Devang Chauhan on December 20, 2016 at 3:29am

Hi Oneiric,

Please check attached file.

-Devang

Attachments:

• HB_01_intro.gh, 465 KB

Permalink Reply by oneiric on December 21, 2016 at 12:48am

Thanks for the quick response!

but it was the same.

The black dialogue box runs several times then it shows the error msg.

Permalink Reply by Devang Chauhan on December 21, 2016 at 1:46am

That's strange. It works fine at my end. Can you post your file again please? 

Permalink Reply by oneiric on December 21, 2016 at 2:18am

Hi Devang

I have tried it again with Daysim reinstalled, the error msg shows the same.

Thank you for your help!

Here are the files again

Attachments:

• HB_01_intro.3dm, 158 KB
• HB_01_intro.gh, 465 KB

Permalink Reply by Devang Chauhan on December 21, 2016 at 3:05am

No errors again. Did you check instructions  here?

Permalink Reply by oneiric on December 21, 2016 at 3:11am

Hi Devang,

I have figured it out that Radiance should be installed directly under as C:\Radiance ( previously I installed it C:\Program Files\Radiance

Although it is not in the instruction but I used Radiance several years ago I vaguely rmb this rule and tried it and it works now.

Thanks so much for your help.