Surface Divide of a list of Surfaces

hi,

i have a problem by dividing a list of surfaces and then getting the subsurfaces.

the first panel shows the pointlist, the second shows the order i want them to be and the third shows how they are...

i don't understand why the output (3rd panel) gets less points then there are in the input (1st panel)...because the points are there...

can someone plz help me...

thanks a lot !!

boris#

ps: the ghx-file just needs 2 srfs (with a different length)

Attachments:

Replies to This Discussion

Permalink Reply by Boris Rüther on June 19, 2010 at 3:17am

maybe it is more a problem of listmanagement, because gh takes the first 4 points of the first surface and the rest of the points of the 2nd... but i don't know why because the branches should be correct??

Permalink Reply by Boris Rüther on June 19, 2010 at 3:14pm

i could figure it out by myself... its was a problem with the listmanagement here is the result...

and the .ghx if anybody wants to know
regards
boris

Attachments:

100618_help_mod.ghx, 473 KB

Permalink Reply by R.Sencu on June 28, 2010 at 7:04am

well, seems that you solved the problem. It is very nice what you did;
My question for you is that you can extract finally each divided subsurface as 3dfaces?!

Thanks in advance!
Razvan

Permalink Reply by Boris Rüther on June 28, 2010 at 10:49am

yes of course you can extract the srfs. if you look at the .ghx-file in the end there is a "list item" comonent which brings the srfs in the right order (here 13 paths with 5 items each; i think) now you can go on with these srfs...

greetings

boris

Permalink Reply by Ian Chan on June 28, 2010 at 11:05am