Urgent help: How to add thickness to "pipe" command

Replies to This Discussion

Permalink Reply by Philipp on January 23, 2012 at 3:18am

mmm You want it to be colsed at the end?

to do so, just change  the last input (look at the hint window)

If you meant closed brep as a pipe, you should make two pipe components, extract ending curves and, for example, loft them. Then joun all surfaces to one brep

Permalink Reply by Danny Boyes on January 23, 2012 at 3:41am

Create two capped pipes and then use solid difference.

With the right Data Management this can be applied to multiple pipes

Attachments:

• PipeThickness.gh, 5 KB

Permalink Reply by Hannes Löschke on January 23, 2012 at 6:30am

I guess the real answer is: see surface->freeform->pipe :)

Permalink Reply by Danny Boyes on January 23, 2012 at 7:38am

your real answer is for a fictitious question :)

"pipe" command in Rhino where you can choose to add thickness to the curve

There is no mechanism built into [Pipe] that allows you to specify a thickness. So a process whereby you create a either a section to sweep/loft or a solid difference approach or I suppose a surface offset with a means to cap the ends is probably your only options. 

Permalink Reply by Hannes Löschke on January 23, 2012 at 2:04pm

Think of it in simple terms... "adding thickness to a curve" is giving it a non-zero radius. In other words: piping it.

Permalink Reply by Philipp on January 23, 2012 at 2:19pm

yeah, exepth that He asked how to add thickness to a pipe, not to a curve :-)

Permalink Reply by Hannes Löschke on January 23, 2012 at 3:47pm

Sorry. I totally missed that option in the command. In the german localisation it says "Grob" which translates to coarse or rough instead of "Thick". So the thickness made no sense to me.

 :D

Permalink Reply by Aisyah Ajib on January 23, 2012 at 2:51pm

Hey thanks a lot guys!! I tried doubling the capped pipe and then using solid difference and that seem to work well!

I beg to differ in regards to my question being fictitious as it's not (to my mind).. in the screenshot below I've highlighted in green the bit in Rhino which lets you choose to add thickness by choosing Yes, which results in the bottom left pipe :)

Also, I'm a She, not He if that matters.

More importantly, many many thanks!!! You've saved me time&headache and added more vocab/sense to my grasshopper language!

Permalink Reply by Danny Boyes on January 23, 2012 at 3:53pm

I merely meant that Hannes had not read the real question.

Permalink Reply by Jon Mirtschin on January 23, 2012 at 2:24pm

This approach will work, but just expect it to slow down if you have hundreds or thousands of members due to the solid difference.  Better to extrude/sweep, and join planar end faces (which is the approach embedded in StructDrawRhino if you're happy with a plugin solution.  The image blow shows an universal beam component, there's a similar circular hollow section generator).