Optimised Path Systems

Replies to This Discussion

Permalink Reply by taz on October 12, 2011 at 1:34pm

Have you looked into Kangroo?  There are some examples floating around.

 

See this discussion:

 

http://www.grasshopper3d.com/group/kangaroo/forum/topics/looking-fo...

Permalink Reply by taz on October 12, 2011 at 4:50pm

There are other discussions out there too...

 

http://www.grasshopper3d.com/forum/topics/vertical-wooly-paths-help-1

Permalink Reply by Pieter Segeren on October 12, 2011 at 1:59pm

Hi Carolyn, though I haven't really used kangaroo, I noticed some things in your definition. The cross reference lines from the pts, results in some invalid lines (Pt to same Pt results in a Line with no length), and there are 'duplicate' lines because there are 2 lines between each two points, with opposite directions (A>B and B>A). You also need to feed the Divide Domain component a domain (is blank now). I hope somebody else can help you with the kangaroo part of your definition.

Permalink Reply by Carolyn Butler on October 12, 2011 at 3:22pm

Thanks Taz & Pieter, I will follow the link and let you know how I get on :)