Irregular offset or tween?

Hello at all!

as you can see I am trying to build a corrugated sheet with different distances.

I tried it with offsets and tweens between each curve Segment but I couldn't achieve

the pattern shown in the Picture. Do you have any idea how to manage this? Offsets or tweens? Hope you can help and thanks a lot in advance!

Attachments:

irregular_offset_or_tween.gh, 14 KB

Replies to This Discussion

Permalink Reply by Michael Pryor on October 25, 2017 at 11:11am

Use a different graph type.

Permalink Reply by Lorenz Weiss on October 25, 2017 at 1:50pm

Thank you,

sorry maybe my scetch isn't that good but I want that the space between each part has the same distance. At the beginning on the left side the left piece of a "roof part" should be wider than the right one. In the middle they should have the same wide and on the right the right part of a "roof part" should be wider than the left part. Do you know what I mean?

Permalink Reply by Jack lee on October 26, 2017 at 10:50pm

is it?

Attachments:

gradual srf with same size gap.jpg, 99 KB
irregular_offset_or_tween.gh, 27 KB

Permalink Reply by Lorenz Weiss on October 27, 2017 at 1:15am

Hey,

thank you it is going in the right direction but I need the gap between the points in your definition all the same size. Here is another sketch maybe it is more understandable with this...

Permalink Reply by Jack lee on October 29, 2017 at 1:49am

Attachments: