split same polygons

Replies to This Discussion

Permalink Reply by Chapulin Colorado on September 8, 2017 at 8:58am

HI,

maybe you could do it like this:

Attachments:

• splitsamepolygonsRE.gh, 13 KB

Permalink Reply by Joe Allberry on September 8, 2017 at 9:41am

Slightly different approach, using Assign Path, either for area OR number of sides.

If you want to combine both use some of the area logic above, try and stitch the two together, or the 3rd option is via the TreeFrog tools from the Human Plugin which does both in one (Really handy plugin!)

Attachments:

• splitsamepolygons-JA.gh, 15 KB

Permalink Reply by Hengameh on September 8, 2017 at 10:11am

Hi Chapulin & Joe

Thanks a lot for your reply, they’re so good, but how can split them with their segments' length?

Permalink Reply by Joe Allberry on September 8, 2017 at 10:30am

Do you mean via the perimeter length? Just use the "Length" into the same logic - added to the end here. If it is length of any one side, explode the curve and measure the length of the first List Item.

You can add it to the one for Assign Paths too. (zoom in to add an input to the Expression tool).

Attachments:

• splitsamepolygonsJA2.gh, 21 KB

Permalink Reply by Hengameh on September 8, 2017 at 10:54am

Thanks a lot for your help. It's really helpful..