Text Tag from filtered list!!!

Replies to This Discussion

Permalink Reply by Raul Matagringo on March 8, 2017 at 8:47am

Hi,

you may need a conversion to integer first. Use the Integer component.

Then you can use the Larger/Smaler than component to compare the values.

to add a char you need the Concatenate component.

Best,

Raul

Permalink Reply by G.C.Ruvio on March 9, 2017 at 2:38am

Thanks for the quick response Raul.

The Value List is an Integer (see attachment), but i don´t understand how can i see only a small portion of the values, (for example from 60 to 80%) with the "Smaller/Large" component or with other components!!

P.S.

Thanks for the tips with the Concatenate components.

Best Regards

Attachments:

• Text Tag.png, 154 KB

Permalink Reply by Raul Matagringo on March 9, 2017 at 2:56am

Hi,

like this: --> use Dispatch component

Permalink Reply by G.C.Ruvio on March 9, 2017 at 3:12am

Hi Raul,

unfortunately I can not use this method, because so the values would no longer referenced with their parent points.

Permalink Reply by Raul Matagringo on March 9, 2017 at 3:16am

you can use dispatch with the same patern on the parent point list. The result will be a filtered parent point list.

Permalink Reply by G.C.Ruvio on March 9, 2017 at 6:52am

Thanks so much for your precious help Mr. Raul

Permalink Reply by Julian Buhagiar on March 9, 2017 at 3:48am

You could try grafting maybe if things become complex

Permalink Reply by Julian Buhagiar on March 9, 2017 at 3:56am

Example Attached

Attachments:

• GrasshopperNumberDisplay.gh, 19 KB

Permalink Reply by G.C.Ruvio on March 9, 2017 at 6:51am

Dear Julian

I don´t know, how to thank you for your work and time.

The problem is: my colored dots are generated  from my simulation script, who calculate the sightview percentage from a viewers to specific points.

I will show the % (of the simulation) above the colored points (problem already solved with the "text tag" and concatenate) and later filter the % of the points to see, only with specific range (even just filter the text, or text and dots).

With your scipt i cant put the Integer list with the referenced points into the (pop2D/pop3d) component.

I hope to exposed well the problem.

Very very thanks and best regards

Permalink Reply by Julian Buhagiar on March 9, 2017 at 3:21am

Here's an alternative too which is using the domain components which is better for describing between functions. As opposed to a single larger than or greater than.

(This can be extended to 2D domains as well)