Grasshopper

algorithmic modeling for Rhino

Equalizing line segments are constructed between two curves (kangaroo)

Good day, dear colleagues!

please tell me what is wrong in my definition
my determination must be carried out as follows:
There are two closed curves, one above the other below (red).
between them is random line (green)
I made a determination (using kangaroo 2) that the line is built at an arbitrary position (green) was reconstructed in line sostayat of identical segments. and this point must lie on top of the upper (red line), and point the bottom line on the bottom line (red).

Views: 702

Attachments:

Replies to This Discussion

Permalink Reply by Daniel Piker on October 8, 2016 at 12:44pm

Hi,

It looks like the only issue here was that the top and bottom points were all constrained to both the top and bottom curves. I made 2 separate OnCurve constraints to keep each set on its respective curve and it works (if I understand correctly the description of the problem).

Hope that helps

Attachments:
Permalink Reply by Gotzman on October 9, 2016 at 3:23am

Hello, Daniel !

thank you very much to check my definition and filled it, thanks rays !!!

RSS

About

Scott Davidson created this Ning Network.

Translate

Search

Photos

  • Add Photos
  • View All

Videos

  • Add Videos
  • View All

© 2024   Created by Scott Davidson.   Powered by

Badges  |  Report an Issue  |  Terms of Service