Project #2 & Assignment #3 Crit Forum

Please post your desk crit/assignment #3's here:

Replies to This Discussion

Permalink Reply by Chris Bradshaw on September 29, 2016 at 4:14pm

I found some scripts which allow the panel to be CNC routed. Still figuring out how to write scripts to influence the surface itself.

Attachments:

C_BRADSHAW_ASSIGNMENT 3.PDF, 346 KB
13.09.23GRASSHOPPERCNCSURFACING.gh, 15 KB
trigcurve.gh, 13 KB

Permalink Reply by Joseph Iwaskiw on September 30, 2016 at 6:02pm

We talked yesterday - seems like you are on the right path. Since you are looking to use the CNC - I am not going to make you have 3 pieces. I do want you in the shop using the CNC once this week - do not wait until the last minute to learn how to use that machine. Even if the script isn't done - get on that machine.

Permalink Reply by Mery G Boza on September 29, 2016 at 4:24pm

Hi, everybody:

Here is my assigment #3.

Attachments:

Assigment #3.png, 778 KB

Permalink Reply by Joseph Iwaskiw on September 30, 2016 at 6:00pm

Mery, looks really good! Start thinking about you will make it - I would assume lasercutter for the roof, but how will the column and roof be connected?

Permalink Reply by Kay Bromley on September 29, 2016 at 4:58pm

Assignment #3

Attachments:

K_Bromley_Assignment_03.pdf, 196 KB
P2.1.gh, 22 KB

Permalink Reply by Joseph Iwaskiw on September 30, 2016 at 5:59pm

Kay, it is a little hard to see what is going on but it seems like you have a good grasp of the script. Remember, three physical pieces are due next week - so start thinking about the ramifications of having that digital form in the real world!

Permalink Reply by Thomas Bueche on September 29, 2016 at 5:03pm

Here is my first pass at a folding system.

Attachments:

Permalink Reply by Joseph Iwaskiw on September 30, 2016 at 5:58pm

For next week, I would print out a few of these and play around with the thickness of the paper you should use. You also need to "calculate" a piece of data, which could be just the area of the panel or you could do color like this: http://architizer.com/projects/chromatexme/

Permalink Reply by David Begley on September 29, 2016 at 5:09pm

Escher Tessellations and Metamorphosis

Working on applying more than one object to the same box morph. So the tessellation can gradually change into something else.

Attachments:

Grasshopper progress sheet.jpg, 697 KB

Permalink Reply by Joseph Iwaskiw on September 30, 2016 at 5:56pm

I would spend this next week figuring a way you can assemble this before perfecting the script as a whole. Once you have the connection of pieces figured out you can come back in and perfect the tessellation. Remember, three pieces due Thursday!

Permalink Reply by Joshua Murphy on September 29, 2016 at 5:20pm

Hi Joe,

Attached is my first attempt however it was very simple and not exactly what I'm looking to continue with. I hope to have a more complex parametric system for next week.

Regards

Josh

Attachments:

Terrace.jpg, 2 MB

Permalink Reply by Joseph Iwaskiw on September 30, 2016 at 5:54pm

Looks good, but if your not going with it need to select something soon and go with it. If you were sticking with this approach, this might work with the CNC machine the best.