Soap-Bubbles / Foam

Replies to This Discussion

Permalink Reply by Mateusz Zwierzycki on January 17, 2011 at 3:10pm

Try searching "voronoi 3d"...

Permalink Reply by Niklaus Siegenthaler on January 17, 2011 at 3:17pm

hey,

 

thanks for your quick reply!

in fact i already searched quite a lot in this direction!

unfortunatly i didn't get the result i'm expecting.

i guess the main problem is that i have just very little experience with grasshopper!

 

any other advice would be very appreciated

 

 

Permalink Reply by Niklaus Siegenthaler on January 17, 2011 at 5:04pm

this is what i achieved till now.

the problem is, if i give every point a different height (which i need to get different size of bubbles) the "intersection" isn't anymore where the bubbles meet.

any idea how to get rid of that?

sorry if i'm asking annoying questions....

 

nik

Attachments:

• Voronoi_Bubble.3dm, 27 KB
• Voronoi_Bubble.ghx, 94 KB

Permalink Reply by Mateusz Zwierzycki on January 17, 2011 at 6:37pm

this is ready made script, i am not even trying to modify that ...i can't. but in this discussion: 

 

http://www.grasshopper3d.com/forum/topics/voronoi-2

 

you can see how it can be made without scripting. Next what you should do after rewriting it, is making it work with different spheres radius.. take a look, you will see what iam talking about. also look at solution made by Vincente and understand how it works...  

Permalink Reply by Jon Mirtschin on January 17, 2011 at 8:35pm

 

StructDrawRhino might also help here, mesh inflation if you create your network of 2d surfaces from the voronoi diagram.  Kangaroo also has inflation now.

 

Permalink Reply by to] on January 18, 2011 at 1:17am

Hi
research should be focused on the work of Frei Otto and his IL papers. He did a lot on this topic. You will find there ways to create it.
cheers,

Permalink Reply by Ángel Linares on January 18, 2011 at 1:46am

I agree with to]

Permalink Reply by Niklaus Siegenthaler on January 18, 2011 at 2:20pm

This here i found on this page:

http://www.grasshopper3d.com/forum/topics/voronoi-volume

 

could anyone tell me how to get that?

i can't quite follow the instructions below the picture....!

 

Permalink Reply by Chris Tietjen on January 18, 2011 at 3:17pm

Here's a start.  You can get creative with the initial point dispersion and then with sub-selections of points by assigning different sphere radii to the various groupings. 

 

Chris

Attachments:

• SoapBubbles.ghx, 54 KB

Permalink Reply by Niklaus Siegenthaler on January 18, 2011 at 3:42pm

hey chris,

thanks for your help!

in the attached file you can see how i got about the same result with a different structure.

as i compare them i'm asking myself if i really ned the voronoi diagram?

And is there a way to create a surface (as in the picture above)at every intersection?

 

nik

Attachments:

• Soapbubble_nik.ghx, 39 KB

Permalink Reply by Chris Tietjen on January 18, 2011 at 7:54pm

Chris

Attachments:

• Soapbubble_nik.ghx, 62 KB

Permalink Reply by Niklaus Siegenthaler on February 16, 2011 at 8:50am

hey guys,

 

thanks for the help i got here. i didn't quite get as far as i wanted.

but my course is over now and it seems to be ok.

 

until next time

 

cheers