A Group of curve, but some of them are flipped. Why ?

Hi,

I have cuted a surface through a bunch of planes. The result are many

curves. Then i want to give them thickness, so i gave them as first step an "offset curve".

But then somehow several curves seems to be flipped and others not so the offsetting works sometimes oppositely. I tried reparametize them, but everything is the same.

Any ideas ?

Miklos

Replies to This Discussion

Permalink Reply by Daniel González Abalde on May 31, 2014 at 5:35pm

First, the offset works sometimes erroneously.
Anyway, try with flip curve component, into G link with the first curve of the list.

Permalink Reply by Miklós Hatvani Deák on May 31, 2014 at 5:37pm

OK i'll try.

Thanks.

Permalink Reply by Miklós Hatvani Deák on May 31, 2014 at 5:53pm

nothing......:(

Permalink Reply by Daniel González Abalde on May 31, 2014 at 6:04pm

share your file or upload a screenshot.

Permalink Reply by Miklós Hatvani Deák on May 31, 2014 at 7:21pm

Hi,

i have attached the files. So inside the .gh is two seperate definition.

But both of them are about to create a beam structure. The green grouped def. is an alone standing beam along a curve.

The other one is the "thing". In the rhino file is a dome. This dome should be a beam structure. There is also a problem with one boundary srf, that there are two many in place of one. Hope you can figure out something, becouse i could not.

I tried also mix these two def. but still, nothing.

Attachments: